Skip to content
12/24/36V 20A Triple Output Battery Charger

12/24/36V 20A Triple Output Battery Charger

by Sydney Digital
SKU MB3617
$370.45 - $370.45
$370.45
$444.95
$444.95 - $444.95
$444.95
1 Year Warranty

Advanced electronic and fully automatic multi-stage battery chargers to charge the starter, auxiliary, and house batteries in your caravan independently of each other. The multi-stage charging process delivers five modes of operation to each battery. This process is proven to extend the life of your batteries and will fully charge your batteries each time you connect to AC power. This battery charger will automatically sense and distribute 100% of the available charging output of up to 20 amps to any one battery or combination of all batteries.  

Features:
- Suits Flooded, Standard AGM, and GEL batteries
- Prewired with 1.8m leads for easy installation
- 100% Waterproof (IP67) and Saltwater tested
- Microprocessor controlled
- System OK & battery bank trouble status indicators
- Energy saver & storage recondition modes

Specifications:
Output Current: 20A @ 12VDC
                            10A @ 24VDC
                            6.6A @ 36VDC
Efficiency: 80%
IP Rating: IP68
NOTE: These chargers are not recommended for long-term "maintenance" charging of unsealed lead-acid batteries, the types with removable filler caps and liquid elctrolyte. Long-term continuous float charging of this type of battery may cause loss of water from the electrolyte, ruining the battery. If you are intending to use this charger on these batteries please use an appliance timer such as MS6113 to automatically limit the charging to 30 minutes or so per day. 

Handy Tip Multi State Charging Information

All-in-one chargers which have multiple charge settings to suitdifferent sized batteries and charging requirements. Capable of recharging the battery and maintaining the charge state indefinitely, they are particularly well suited to being continuously connected to a battery. Some models also have additional functions such as rapid boost charging and can also be used as a general purpose high current power supply. For further information see these types of possible charging states *may not be applicable to the unit you are viewing *
BATTERY TEST - Checks the battery to ensure it is ready for charging, polarity of leads etc.
DESULPHATION: Detects sulfated batteries. Pulsing current and voltage, removes sulfate from the lead plates of the battery restoring the battery.
SOFT START: Initial battery test to determine battery condition. Ift he battery is severely discharged, charger will begin the Soft Start stage. Charging starts with reduced current until battery voltage reaches a normal condition for charge.
BULK MODE: Major charging stage where the battery receives the majority of its charge. During this stage the battery is charged to up to 80% capacity.
ABSORPTION MODE: Completes the charge up to virtually 100% at a slower charge rate to protect the batteries working life.
RECONDITION MODE: Select “Recondition” mode, charges at higher voltage to recondition the sulfate of the battery to save battery life.
ANALYSIS: Tests if the battery can hold charge. Batteries that cannot hold charge may need to be replaced.
FLOAT: Low constant voltage, minimal charge current, battery is fully charged.
PULSE MODE: Maintaining the battery at 95-100% capacity. The charger monitors the battery voltage and gives