Heavy Duty Current Shunt - 1 - 5A
At long last we have found a supplier of quality hand-made accurate current shunts. They are designed to work across a Digital Panel Meter on their 0 - 200mV range, i.e. the most common type. When set on this range the DPM will read the voltage drop across the shunt directly in amps. Strictly speaking, the 50A shunt will read under 5A of course.
The shunts are quite ruggedly made, however and will happily withstand up to 20% overload. To set up the DPM simply wire the appropriate decimal point to the meter board and connect the 0 - 200µV straight across the shunt inner screw terminals. At 50mV (for 5A) the meter should read 5.00A. The ‘A' annunciator must be wired up as well.
• Voltmeter is on millivolt scale
• Voltmeter connections to shunt are on each side of shunt
• If current is DC observe polarity. If AC amps connect either way
• Specs of shunt generally stamped on the shunt itself ie. 50mV/50A
(volt drop across shunt) equates to 5, 10, 20A max current, etc.i.e. A 25mV reading on the millivolt meter would equate to 25Acurrent on a 50mV/50A shunt. You can read the current straight off the millivolt scale on the meter.
Product Dimensions
| Depth | 25mm |
| Length | 120mm |
| Width | 30mm |
Packaged Dimensions
| Packaged Volume | 0.224l |
| Packaged Weight | 0.102kg |
| Packaged Length | 14cm |
| Packaged Width | 4cm |
| Packaged Height | 4cm |
Current shunts
| Shunt current | 1A, 1A |
| Shunt resistance | 10mΩ |
| Voltage drop at max current | 50mV |
| Shunt accuracy | 0.5% |